Boilers

Treatment4Water supplies industrial water treatment chemicals for steam raising and hot water boilers.

Steam Boiler Chemicals

Treatment4Water provides a comprehensive range of formulated own-label products to treat industrial steam boilers. Our proven products address issues related to oxygen scavenging, metal passivation, internal conditioning, alkalinity and pH control, foaming, and steam line and condensate protection. 

Hot Water Boiler Chemicals

Treatment4Water provides a comprehensive range of formulated own-label products to treat closed circuit hot water boilers. Our proven products address the issues of scale and corrosion problems, assuring efficient operation and increased longevity of your hot water boiler.

Steam Boiler Chemicals

Treatment4Water formulate own-label products to cover low, medium, and high pressure systems.

Our deep level of experience, knowledge, and expertise in this area is available to all our customers in the form of technical support, from product selection through to application advice, and troubleshooting guidance.

Our team of experts are on hand to give valuable selection and application guidance for all our products.  Contact us for details of our own-label product range.

Product Guide: Steam Boiler Chemicals

SYN-PLEX

Properties

Dosing and Control

101:  Alkalinity Builder

pH & Alkalinity correction in feed and boiler water Freezing Point 70C

Minimum 200mg/L as CaCO3 OH- alkalinity 1.1 (B/C +H-M) 

101-50: Alkalinity Builder

Alkalinity builder and pH adjuster for steam boilers

Feed water pH should be between 7.5 and 9.5. Use equation 1.1 (B/C + H-M)

101-69: Alkalinity Builder

pH & Alkalinity correction in feed and boiler water. 32% Caustic

Minimum 200mg/L as CaCO3 OH- alkalinity 1.5 (B/C + H-m)

105:  Alkalinity Builder

pH & Alkalinity builder. Low Freezing Point  < -100C

1.8(B/C + H-M) Minimum 200mg/L CaCO3 OH alkalinity

113: Medium – High Pressure Water Tube Boiler

2.8-2.7 Ratio Na:PO4 Co-ordinated/Congruent phosphate

Dependant on operating boiler pressure usually 15-30mg/L as PO4

160: Online cleaner

D1151 Sludge Control Dispersing Agent for General Solids and Iron Sludges

1% of system volume

170: Boiler Water Conditioner

Polymer, Phosphate Sequestrant

4.2 (B/C + 0.6H), 30 – 70mg/L as PO4

171: Boiler Water Conditioner

Polymer, Phosphate Sequestrant with added alkalinity

4.2(B/C + 0.6H)
30 – 70mg/L as PO4 

172: Boiler Water Conditioner

Polymer, Phosphate Sequestrant

8.4(B/C + 0.6H)
30 – 70mg/L as PO4 

175: Boiler Water Conditioner

Polymer, Phosphate Sequestrant with dispersant

4.2(B/C + 0.6H)
30 – 70mg/L as PO4 

177: All-in-one Product Small Boilers

Phosphate, Polymers, Alkalinity Builder and Erythorbate for high quality/RO feed water

100mg/L of product to boiler to achieve a reserve of 30 – 70mg/L as PO4

178SE: All-in-One Product – Small Boilers

Phosphate, Polymer & Erythorbate. Metal passivator

100mg/L of product to boiler to achieve a reserve  of 30 – 70mg/L as PO4

178: All-in-One Product – Small Boilers

Phosphate, Polymer, Tannin Reduced conductivity contribution

100mg/L of product to boiler to achieve a reserve  of 30 – 70mg/L as PO4

179E: All-in-One Product – Small Boilers

Phosphate, Polymer & Erythorbate. Metal passivator & alkalinity builder

100mg/L of product to boiler to achieve a reserve of 30 – 70mg/L as PO4

179: All-in-One Product – Small Boilers

Alkalinity builder, Phosphate, Polymer, Tannin reduced conductivity contribution

100mg/L of product to boiler to achieve a reserve  of 30 – 70mg/L as PO4

180: Sulphite Multifunctional 

Phosphate, Polymer, Alkali, Catalysed Sulphite, Iron sequestrant

42mg/L/ppm O2 to achieve a reserve of 30mg/L as SO3

180N: Sulphite Multifunctional (neutral formulation)

Neutral pH sulphite, phosphate, polymer multifunctional 

42mg/l to the boiler feed water per 1mg/L dissolved oxygen

180A: Sulphite Multifunctional 

Phosphate, Polymer, Alkali, Catalysed Sulphite, Iron sequestering agents & neutralising amine for steam boilers

42mg/l to the boiler feed water per 1mg/L dissolved oxygen

194: Boiler Water Antifoam

Boiler Antifoam

Depending on system contamination/Foaming level Typically 1-5 ppm

SYN-OTROX

Properties

Dosing and Control

202: Oxygen Scavenger and Metal Passivator

Low solids, scavenger / metal passivator aids, MAGNETITE formation

Tannin reserves 120-160mg/L

202C: Oxygen Scavenger & Passivator

Tannin, Caustic

Tannin reserves 120-160 mg/L

214: Oxygen Scavenger

Uncatalyzed liquid bisulphite 38.5%

Sulphate reserve 2.5(B/C + 8(O2)) mg/L

215N: Oxygen Scavenger

Neutralised Sodium Bisulphite

30mg/L per ppm of oxygen in the feed water

216: Oxygen Scavenger

Catalysed liquid bisulphite. Sulphite reserves of 30-70mg/L in boiler

1.5(B/C + 8(O2)) 30-70mg/L as SO

218: All Organic Passivator & Scavenger

Erythorbate solution 15mg/L reserve as Erythorbate for scavenging or 5mg/L reserve for passivation

50-150mg/L to boiler feed

223: Medium-High Pressure Boiler

Volatile oxygen scavenger / metal passivator (DEHA)

17.6:1mg/L O2. DEHA Reserve of 0.5mg/L in condensate

226: Medium-High Pressure Boiler

Non-volatile oxygen scavenger and metal passivator (Carbo-hydrazide)

55:1mg/L for 1mg/L O2 in feed water

SYN-AMINE

Properties

Dosing and Control

310: Steam Line and Condensate

Cyclo-hexylamine: High distribution ratio for long condensate lines

Monitor condensate @ pH8.5
2.5 x feed water alkalinity

330: Steam Line and Condensate

DiEthyl-Aminoethanol (DEAE): 50%

Monitor condensate @ pH8.5
2.0 x feed water alkalinity

330-20: Steam Line and Condensate

DiEthyl-Aminoethanol (DEAE): 10%

Monitor condensate @ pH8.5
10.0 x feed water alkalinity

340: Steam Line and Condensate

Morpholine: Low distribution ratio for short condensate lines

Monitor condensate @ pH8.5
2.5 x feed water alkalinity

350: Steam Line and Condensate

Monitor condensate @ pH8.5
2.5 x feed water alkalinity

Monitor condensate @ pH8.5
2.5 x feed water alkalinity

350-350: Steam Line and Condensate

Morpholine & Cyclohexylamine wide distribution ratio for medium to long condensate lines 

Monitor condensate @ pH8.5
5.0 x feed water alkalinity

CETAMINE®

Properties

Dosing and Control

G820: Surface-Active Corrosion Inhibitor 

Cetamine® Filming Amine (CFA), alkalizing amines,polymer

System specific and needs to be defined together with a Kurita representative

FB430: Surface-Active Corrosion Inhibitor -Food Industry

Cetamine® Filming Substance (CFS) and alkalizing amines

System specific and needs to be defined together with a Kurita representative

DReeM Polymer™ 3554: Silica & Hardness Control and Corrosion Inhibitor

Sulphite, inorganic phosphates and DReeM Polymer™

System specific and needs to be defined together with a Kurita representative

Share This