Closed Systems
Treatment4Water provides a comprehensive range of formulated own-label products to treat all chilled and heating closed water systems.
Our products offer solutions to the common problems associated with operating a closed water system. Corrosion, scale and general solids fouling on heat transfer surfaces, and biological issues are all covered by our product range.
We have formulated a range of high concentration, low dose rate products which are proven to be extremely effective.
Our team of experts are on hand to give valuable selection and application guidance for all our products. Contact us for details of our own-label product range.
Product Guide: Industrial Closed System Water Treatment Chemicals
SYN-QUEST
Properties
Dosing and Control
TD52: Inhibitor. Multi-metal systems including Aluminium
Alkanolamine, Azole, Co-polymer, Molybdate, Phosphonate
Fill up charge: 2 litres/m3
Monitor: MoO4 at >250mg/L
TD52-20: Inhibitor. Multi-metal systems including Aluminium
Alkanolamine, Azole, Co-polymer, Molybdate, Phosphonate
Fill up charge: 10 litres/m3 Monitor
MoO4 at ≥250mg/L
TD55: Inhibitor, Multi- metal Systems including Aluminium
Alkanolamines, Azole, Co-Polymers, PCA , Phosphonates
Total Organic
alkalinity titration
Fill up charge: 3 litres/m3
428: Inhibitor. Multi-metal systems including Aluminium
Azole, Molybdate, Nitrite
Fill up charge:10 litres/ m3.
Monitor MoO4 at >300mg/L
428T: Traced Inhibitor. Multi-metal systems including Aluminium
Azole, Molybdate, Nitrite
Fill up charge:10 litres/ m3.
Monitor MoO4 at >300mg/L
429: Inhibitor, Multi- metal Systems except Aluminium
Azole, Co-polymer, Molybdate, Nitrite
Fill up charge: 4 litres/m3
Monitor: NaNO2 at 450-600mg/L
429-40: Inhibitor. Multi-metal systems including Aluminium
Azole, Co-polymer, Molybdate, Nitrite
Fill up charge: 10 litres/m3 Monitor
NaNO2 at 450-600mg/L
431: Inhibitor, Multi- metal Systems except Aluminium
Azole, Biocide, Co-polymer Nitrite, Phosphonate
Fill up charge: 4 litres/m3
NaNO2 maintain reserve 1,000mg/L
436: Inhibitor, Multi- metal Systems except Aluminium
Azole, Co-polymer, Nitrite, Phosphonate
Fill up charge: 3 litres/m3
NaNO2 maintain reserve ≥250mg/L
439: Chemical Treatment Booster
Sodium Nitrite 25%
Maintain sodium nitrite reserves between 800 and 1000 mg/l
482: Inhibitor, Multi- metal Systems except Aluminium
Alkali, Polymer, Tannin
Fill up charge: 3 litres/m3
Maintain a Tannin reserve of 100 – 160 mg/L
499: Acidic pH Buffer
Acetate
Dose rate as per required pH range
Mono Ethylene Glycol
MEG
10-30% v/v depending on chill protection required
Inhibited Mono Ethylene Glycol
Inhibited MEG
25-60% v/v, 50% optimal in Northern Europe to protect to –40 deg c.
Mono Propylene Glycol
MPG
10-30% v/v depending on chill protection required
CETAMINE®
Properties
Dosing and Control
G900: Surface-Active Corrosion Inhibitor
Cetamine® Filming Amine (CFA), alkalizing amines, polymer, copper inhibitor
system specific and needs to be defined together with a Kurita representative
F310: Surface-Active Corrosion Inhibitor
Cetamine® Filming Amine (CFA), alkalizing amines, copper inhibitor
system specific and needs to be defined together with a Kurita representative
F365: Surface-Active Corrosion Inhibitor – Aluminium safe
Cetamine® Filming Amine (CFA), copper inhibitor
system specific and needs to be defined together with a Kurita representative